FLEX PRO

Description

The FLEX PRO is a comfortable fall arrest harness with extensive features for complex work at heights and in fall risk areas. The waist belt is anatomically pre-shaped and comes with four gear loops to provide plenty of options for holding lanyards and tools. Depending on requirements, the metal dorsal D-ring can be ‘locked’ in a fixed position by the VCR fastener or allowed to slide up and down. Protectors on the back and hips shield the fabric and make it easier to glide along structures, for example in narrow shafts.

• Easy to put on and adjust to any body size thanks to the jacket system
• Fall indicator in the back padding; a red label becomes visible in the window in the back plate following a load of over 6 kN
• Textile joints for optimum adaptation to movements even when the straps are pulled tight
• Easy Glider buckle on the shoulder straps for easy adjustment, detachable strap keeper for cleanly stowing away the straps
• Detachable leg padding
• 3D mesh with a closed surface structure prevents the adhesion of dirt and chippings and enables good air circulation
• Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard
• Four textile gear loops
• Four attachment options for EDELRID Tool Bags (load: 25 kg)
• Maximum weight of user: 150 kg
• Integrated NFC chip
• Metal fall arrest eyelet in accordance with EN 361, dorsal D-ring
• Double Lock buckles on the legs and hips for outstanding ease of use
• Labeling field and attachment option for a radio on the shoulder
• Integrated protectors on the back and hips for enhanced protection, for example when climbing in confined spaces
• Textile fall arrest eyelets (two-part sternal) in accordance with EN 361 remain open under preload and make it easy to attach an additional carabiner
• All load-bearing straps are equipped with indicator tape; red fibers become visible in the event of damage and signal to the user that the harness should be replaced